Densitometer with manual probe ДЦ- 5003 (earlier DD5005-220)

category: accessories

Densitometer ДЦ-5003 with manual probe, digital indication on LED display and line supply of 220V for the measurement of optic density of industrial X-ray film. The manual probe is connected with main instrument by flexible cable 1 m long.

The technical particularity consists in the microprocessor control system ДЦ-5003 used in the instrument. This system allowed the implementation of automatic light source calibration in the instrument. The semi-automatic zero adjustment is also implemented in the densitometer. It is activated when the probe is installed on the fluorescent surface by short-term pushing of the button, thus avoiding any inevitable earlier manipulations with potentiometer of zero adjustment.

LED indicator is workable within large range of temperatures and its readings are well distinguishable both in complete dark and under brilliant sunshine. It is powered from line supply of 220V, which is convenient in conditions of laboratory and saves from the need in purchasing expensive batteries.

The densitometer ДЦ-5003 has all necessary certificates and it is registered in the register of instrumentation certification system.

Technical characteristics
Measurement range	0 - ±6.0
Certified measurement range	0 - ±5.0
Accuracy of measurements	±0.03 within the range of 0 - ±5.0
Size of field to be measured	1.7 mm (diameter)
Duration of measurement	Not more than 0.4 seconds
Zero calibration	Semi-automatic
Working range of temperatures	-200С … +550С
Power of the instrument	220V ± 10%, 50/60 Hz, < 5 W
Dimensions	100 x 60 x 25 mm
Weight	210 g

Additional capabilities (by request of the client):

- Reduction of the size of the field under measurement (reduction of the measurement range without losses in the accuracy)
- Power from line supply of 110V or from non-standard power line
- Increase of manual probe cable length
- Output RS232 to the personal computer