 | kodak x-ray films |  |
RADIOGRAPHIC INDUSTRIAL FILMS “KODAK”
produced according to the state-of-the-art technology T-Grain
The range of radiographic (X-ray) industrial films INDUSTREX meets the highest requirements of modern industrial radiography both by sensitivity level and by quality of image produced. Each type of the film is certified on the compliance with standards: ASTM E1815, ISO 11699-1 and CEN 584-1.
All films of family KODAK INDUSTREX put into effect the patented technology T-GRAIN (Т-CRYSTAL) and demonstrate the excellent resistance to physical and temperature effects as well as to the effects of humidity and static electricity.
Characteristics of radiographic (X-ray) films Kodak INDUSTREX:
Type of film |
Properties and application |
HS800 |
High-speed, high-contrast, medium-grained X-ray film. Could be used together with fluorescent and fluoro-metallic screens and without them when inspecting concrete and heavy constructions, thick-wall castings and shelf pipelines with short optical exposures, |
AА400 |
High-speed, high-contrast, fine-grained X-ray film. Could be used for all tasks of non-destructive control together with lead screens and without them in aircraft building, when inspecting castings, welded connections and pipelines, civil structures. |
T200 |
Medium-speed, high-contrast, particularly fine-grained X-ray film. Designed for the use in critical conditions when the high-quality image is needed. |
MX125 |
Low-speed, particularly contrast, particularly fine-grained X-ray film. Could be used for important tasks of non-destructive control together with lead screens in all branches of industry. |
M100 |
Low-speed, particularly contrast, ultra fine-grained X-ray film. Could be used for important tasks of non-destructive control together with lead screens when there is X-ray and Gamma-ray radiation from accelerators. |
Types of film packing:
non-interleaved |
Film sheets without paper gaskets are sealed into the foil package, for the exposure in the rechargeable cassettes. |
Interlesved |
Every film sheet is inserted into the paper folder, for the exposure in the rechargeable cassettes |
Ready Pack II |
Each film sheet is in light- and waterproof flexible package е. |
Pb Contactpak |
Each film sheet is in vacuum light- and waterproof flexible package between two lead intensifying screens. |
NIF Bulk Roll |
The roll of film is sealed into the paper-polyethylene package to ensure the protection against any humidity. For the use in rechargeable cassettes. |
Ready Pack |
The roll of film is sealed into the protective light-proof package without any lead intensifying screens. It could be exposed by any side while being inside the own package |
Lead Pack |
The roll of film is sealed into the protective light-proof package and interlaid with lead intensifying screens. |
Classification of radiographic (X-ray) industrial films KODAK INDUSTREX in comparison with similar products of other producers.
Film type |
Standard ASTM E 181596 |
Standard DIN 54-117 |
Standard CEN 584-1 |
Analogue of AGFA Structurix |
Analogue of FUJI |
Analogue of FOMA Fomadux |
MX125 |
1 |
G2 |
C3 |
D4 |
|
R4 |
T 200 |
1 |
G2 |
C4 |
D5 |
IX 80 |
R5 |
AA 400 |
2 |
G3 |
C5 |
D7 |
IX 100 |
R7 |
CX |
3 |
G4 |
C6 |
D8, F8 |
IX 150 |
R8, RX-1 |
KODAK has certificates: TUV, LLOYDS, S.G.S., BAM.
Federal State Unitary Enterprise “NIKIMT" approved the use of radiographic film KODAK in nuclear power engineering. в атомной энергетике. Federal State Unitary Enterprise "VIAM" approved the use of radiographic film KODAK in aircraft industry.
Quality system of KODAK is certified by ISO 9000, ISO 9001, ISO 9002.
|
|
add to cart
delete from cart
|
|
|
|
|
|
|
|
|
